Social Media


Welcome, Guest
Username Password: Remember me

Selling off remainder of spec parts and pieces
(1 viewing) (1) Guest
  • Page:
  • 1

TOPIC: Selling off remainder of spec parts and pieces

Selling off remainder of spec parts and pieces 9 years, 9 months ago #17888

  • LVIINC
  • OFFLINE
  • Drivers Ed
  • Posts: 8
Late headers (3) sets $50.00 ea
Cam towers (3) $50.00 ea
Power racks (3) $50.00 ea
Rear control arms (4) $25.00 ea (L & R)
1 yr old koni rear shocks early $100.00 set
Camber plates 1 sets GC $200.00 ea set
Front spring sets (3) 350# $50.00 set
Lower control arms 2 races old $75.00
Front strut housings (3) sets $50.00 set
Early Starter $50.00
Clutch discs (2) $50.00 ea
DME's (3) early $50.00 ea
AFM's (3) early $25.00 ea
Set of used RR's on cookies $500.00 neg.
Radiators (3) used $100.00 ea
Fans (1) 5 blade sets $50.00 ea
Two new ball joints (early) $10.00 ea
Tie rod ends (4) $10.00 ea
Late oil pickup baffled $25.00
Complete 86 motor new water pump belts and head $400.00 (needs oil pan)
Sandwich plates (1) $20.00 ea
Short 5th gear set $350.00
2 brake boosters with master cyclinders $75.00 ea
8 front calipers $10 ea
6 rear calipers $10 ea
New HP+ Rears 2 sets $75.00
I also have fuel rails, injectors, coolant bottles, 5 point harnesses (these are out of date but good for DE's), 2.5" spring hats and perches, new injector harness, and a ton of other misc parts. If you are looking for something email me directly @ This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Re: Selling off remainder of spec parts and pieces 9 years, 9 months ago #17891

  • ChuckS
  • OFFLINE
  • Seasoned Racer
  • Posts: 181
Where are you located?
Chuck Sharp
San Diego, CA
1986 Spec 944 #58
Red / Twin White Stripes

Re: Selling off remainder of spec parts and pieces 9 years, 9 months ago #17892

  • LVIINC
  • OFFLINE
  • Drivers Ed
  • Posts: 8
Belvidere, IL

Re: Selling off remainder of spec parts and pieces 9 years, 9 months ago #17894

  • rd7839
  • OFFLINE
  • Endurance Racer
  • Posts: 625
I need headers so save me a set and email me with details at This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Thanks!
Ron
  • Page:
  • 1
Banner
Time to create page: 0.08 seconds