Social Media


Welcome, Guest
Username Password: Remember me

Head Gasket - MLS Gaskets?
(1 viewing) (1) Guest
  • Page:
  • 1

TOPIC: Head Gasket - MLS Gaskets?

Head Gasket - MLS Gaskets? 14 years, 5 months ago #6463

I'm putting together the parts list for my top end rebuild. I've started using Cometic Multi-Layer Steel head gaskets on all the head jobs I do. I was considering this for my 944 Spec Car, but upon a quick review of the rules I found this:

11.6 Gaskets OEM or OEM replacement gaskets are required.


I'm taking this to mean that they have to be of OEM type materials. Is this correct? If so It looks like the Cometic head gasket can't go on my parts list.

Thanks,
-bj

Reference: garage.ideola.com/prod-Cometic.html

Re:Head Gasket - MLS Gaskets? 14 years, 5 months ago #6469

  • cbuzzetti
  • OFFLINE
  • Endurance Racer
  • 944 Spec = The best racing on the planet
  • Posts: 1192
I believe that to be correct. It must be an OEM gasket or equivilent (same construction).
2018 NASA 944Spec National Champ
2018 NASA ST5 P2 944 Nationals COTA
2017 NASA 944Spec WSC P3
2016 NASA PTD-944 WSC P2
2015 NASA GTS1 Western Champion
2014 NASA 944Spec Western Champion
2013 NASA 944Spec So-Cal Regional Champion
2013 NASA 944Spec National P3
2010 NASA GTS-1 National Champion
2010 NASA 944Spec National P3
2010 NASA So-Cal 944Spec Regional Champion
2009 NASA 944Spec National Champion

Re:Head Gasket - MLS Gaskets? 14 years, 5 months ago #6472

  • Weston
  • OFFLINE
  • Seasoned Racer
  • Destroyer of Chris
  • Posts: 277
I agree... I don't think we can do MLS.
#22 - Red 1983 Porsche 944 - Rocky Mountain


944 Pics & Video

Re:Head Gasket - MLS Gaskets? 14 years, 5 months ago #6500

Yep,
That is correct.

The good news is that headgaskets are not weak point on these motors. The only headgaskets I have seen fail were old one on un-rebuilt motors.
Joe Paluch
944 Spec #94 Gina Marie Paper Designs
Arizona Regional 944 Spec Director, National Rules Coordinator
2006 Az Champion - 944 Spec Racer Since 2002
  • Page:
  • 1
Banner
Time to create page: 0.08 seconds